Pulse Oximeter Units

330100

Mfr # 3301

3301 Hand-Held Pulse Oximeter

Price: $624.00

Item # 330100

Medaid 340 Hand Held Pulse Oximeter With Monitor

Quantity

For the best in portable pulse oximetry, rely on the industry leader. Smiths Medical’s BCI 3301 hand-held monitors are renowned for their quality and accuracy, not to mention the user friendly design. The 3301 Hand-Held Pulse Oximeter is a compact and durable monitor perfect for the daily rigors of on-the-go patient monitoring. Whether you are caring for a pediatric patient in an EMS vehicle racing down the highway or treating an adult in a hospital’s intensive care unit, the BCI 3301 Hand-Held Pulse Oximeter will give you fast, accurate pulse and SpO2 monitoring data so you can care for your patient appropriately.
The monitor is ergonomically designed to fit comfortably in your hand. The batteries will power hours of continuous monitoring or convenient spot checks anywhere you need. An auto off feature conserves battery power. You will be able to navigate the straightforward display with no problems, and the bright display is clear and readable. Need to go back and review data? Not to worry, the 3301 Hand-Held Pulse Oximeter can store data from up to 99 patients.

Features:

Rugged, ergonomic design
Quantitative pulse strength bar on screen.
Bright LED display Two-button operation
Powered by 3 C-cell or NiCAD batteries
Can use all SMPM sensors
Memory: 1,000 Spot Checks, up to 99 patients
Battery Life: Approximately 24 hours in Continuous Use Mode or 1500 spot checks, 1 min ON, 2 min OFF
Stands up to rough treatment in variety of environments
Easy to read in poor light
User friendly
Simple Interface
Long lasting power, portability
Unit can be used in numerous environments with neonate to adult patients

Compare

$$589.00

340010

Mfr # POX010-340

Medaid 340 Hand Held Pulse Oximeter With Monitor

Price: $589.00

Item # 340010

Nellcor N-65 OxiMax Pulse Oximeter

Quantity

Mediaid’s full-featured Model 340 Handheld Pulse Oximeter is just what you need for continuous patient monitoring to alert you to any changes in pulse or oxygen saturation, even when you are not at your patient’s bedside. This unit is lightweight and easy to carry, yet durable enough to endure shocks and vibrations. Attach it to an IV pole or wall, mount it on the tabletop, or let the patient carry it by hand. Patient monitoring couldn’t be any easier, thanks to an audible tome that changes in pitch as the oxygen saturation level fluctuates. You can set the pulse tone to a customized level, or recall your previous alarm settings from the memory. Two large, clear LED screens display the exact oxygen saturation and heart rate and also show visual alarms when needed. The intuitive keypad layout will help you set up the unit quickly and easily.

The Medaid Model 340 Handheld Pulse Oximeter not only provides accurate oxygen saturation and pulse rate monitoring, it also provides the information you need faster. A unique averaging sequencing technique enables faster response time, so you will be alerted sooner to any changes that need your attention. Power the Model 340 Handheld Pulse Oximeter with an AC plug or the rechargeable battery. The NiCad battery lasts 12 hours, and a low battery indicator will warn you before the battery power is finished. If you would like to review patient data, you can easily download analog or serial data from the unit.

Features:

Intended for continuous pulse oximetry
Ideal for most users and situations
A portable pulse oximeter with alarms and two bright LED displays
12-hour NiCad battery or continuous AC-powered operation
Adjustable pulse tone levels Pitch changes with rise or fall in oxygen saturation
Adjustable alarm levels for oxygen saturation and pulse rate
Previous alarm settings are recalled from memory
Output port for analog or serial data communication to other instruments
Exclusive five year warranty assures dependability and quality
Dimensions: 7.5 (L) x 3.5 (W) x 1.38 (H) in.; 19.1 (L) x 8.9 (W) x 3.5 (H) cm Weight: 17.5 oz. (496 grams)
Accuracy: SpO2: 100-70% ± 2%; 69-60% ± 3%; Less than 60% unspecified Accuracy:
Pulse: 32-250 BPM ± 2 BPM\

Compare

$749.00$555.00

650000

Mfr # N65-NA1

Nellcor N-65 OxiMax Pulse Oximeter

Price: On Sale! $555.00

Item # 650000

John Bunn DigiO2 Finger Pulse Oximeter

Quantity

You need to be able to monitor your patients reliably to provide the best care. Fortunately, you can trust the handheld Nellcor N-65 OxiMax Pulse Oximeter for the most accurate and dependable SpO2 and pulse rate values. The OxiMax system has revolutionized pulse oximetry with the introduction of sensors that do signal calibration themselves instead of transferring data to the monitor for calibration. This new design boosts the accuracy of the patient vital signs collected. In addition, the N-65 OxiMax Pulse Oximeter has an extra-large range of accuracy (from 60% to 100% SpO2) and is resistant to signal interference. Clinicians need reliable monitoring data to treat patients during low perfusion, and the expanded lower range of accuracy is a significant improvement over other sensors that are not reliable below 70% SpO2.

Enhanced accuracy is coupled with convenience in the handheld N-65 OxiMax Pulse Oximeter. The compact, lightweight oximeter is easy to carry around, and the battery will last for extended periods of time. The streamlined keypad is easy to use and the backlit screen offers clear visibility. Use this portable oximeter for a quick check or continuous monitoring, on almost any patient, anywhere. Now you can accurately measure SpO2 and pulse rate values even for patients who were difficult to monitor using other systems.
The N-65 OxiMax handheld pulse oximeter is compatible with the entire line of innovative OxiMax™ sensors, including the MAX-FAST™ forehead sensor and SoftCare™ non-adhesive sensors.

Features:

Nellcor's advanced signal processing technology delivers reliable operation even in difficult monitoring conditions.
Compatible with the complete line of single-patient use, reusable and specialty OxiMax sensors.
Features LoSat expanded accuracy range (60% to 100% SpO2) when used with OxiMax adhesive sensors.
Conveniently small and lightweight.
Ergonomic shape and simple keypad make it easy to operate.
Audible and visible alarms.
Bright blue, backlit display is easy to see in any lighting conditions.
Long battery life: 19 or 40 hours depending on battery type.
Appropriate for continuous monitoring or spot checks in most any clinical setting including physician offices or clinics, EMS/transport or in acute care settings.

Limited Time Only!

Includes free of charge:

DS100A: Durasensor Reusable Sensor, Adult
D-YS: Dura-Y Multisite Reusable Sensor
D-YSPD: Pedicheck Reusable Pediatric Clip

Compare

$$191.65

200700

Mfr # JB02007

John Bunn DigiO2 Finger Pulse Oximeter

Price: $191.65

Item # 200700

Diagnostix 2100 Digital Fingertip Pulse Oximeter

Quantity

Monitor patients easily and quickly with the John Bunn DigiO2 Finger Pulse Oximeter from Graham Field. No need to bother with separate sensors or cords since this battery-powered pulse oximeter gently clamps onto the patient’s finger for measurements of oxygen saturation, pulse rate, and perfusion index (pulse strength). The small size if this unit makes it perfect for EMS use and the accurate results are reliable enough for hospital and clinical use. Patients who need to monitor oxygen levels or pulse at home will also find the DigiO2 Finger Pulse Oximeter to be the perfect answer with the easy to use, one-button keypad.

The DigiO2 Finger Pulse Oximeter will alert you to high pulse rate, low pulse rate, or low oxygen saturation with visual and auditory alarms. A tone and visual indicator will also warn you when the batteries are running low. Battery life is extended with an auto-shut down when the unit is left on but is not in use. One year warranty.

Includes:

1 DigiO2 Finger Pulse Oximeter
1 Lanyard
1 Pouch
2 “AAA” alkaline batteries
1 User Manual

Features:

Provides fast and accurate SpO2, pulse rate and pulse strength measurements
Large LED color display that allows for easy-to-see day or night use
Simple one button operation
Automatic power on/off function (shuts off after 8 seconds of non operation to conserve batteries)

Display: Oxygen saturation (SpO2), pulse rate and PI measurements.
Bar graph display.
Multi-directional display so readings can be viewed from any angle.

Display Range:

SpO2: 35% to 99%
Pulse Rate: 25 to 250 bpm
Perfusion Index 0.2% - 20%

Accuracy (% SpO2): 75% - 99% ± 2%; 50% - 75% ± 3%
Pulse Rate Accuracy: 25 to 250 bpm ±2bpm
Perfusion Index: 0.2% - 2% ± 0.1%; 2% - 10% ± 1%; 10% - 20% ± 2%
Audible and visual alarms for Low Battery, Low SpO2, High Pulse Rate, Low Pulse Rate
Pre-set Alarm Limits: Low SpO2 - 90%; Low Pulse Rate - 50bpm; High Pulse Rate - 120bpm
Dimensions: 2.59" x 1.42" x 1.3" (66 mm x 36 mm x 33 mm)
Weight: 60g (including batteries)
1 Year Warranty

Compare

$91.40$99.75

210000

ADC-Diagnostix-2100-Digital-Fingertip-Pulse-Oxymeter---250.jpg

Mfr # 2100

Diagnostix 2100 Digital Fingertip Pulse Oximeter

Price: On Sale! $99.75

Item # 210000